manualshive.com logo in svg

Toshiba e-Studio477s, Руководство для продвинутых пользователей, Страница: 225 / 264

Поделиться
Скачать
Toshiba e-Studio477s Скачать руководство пользователя страница 225

MANAGING COUNTERS (COUNTER MENU)

- 225 -

2

1

3

4

5

6

7

3

Press [YES].

The department code is now deleted.

Memo

• Press [NO] to cancel the deletion.

Resetting the counters for each 
department

You can reset the counters for the specified department code.

1

On the DEPT. MANAGEMENT menu screen, 
press [DEPARTMENT REGISTRATION].

The DEPARTMENT CODE screen is displayed.

Memo

• For instructions on how to display the DEPT. 

MANAGEMENT menu screen, see the following page:

P.220 "Logging on as administrator"

2

Press the department button whose 
counters you want to reset, and then 
[RESET COUNTERS].

The message “CLEAR OK?” is displayed on the 
CONFIRMATION screen.

Memo

• If the touch panel does not display the desired 

department code, press 

 to display the next page.

3

Press [YES].

The counter is now cleared.

Memo

• Press [NO] to cancel the clear operation.

Setting output limitations for all 
departments

You can set output limitations for all departments in a single 
operation. When you select [ON], output will be disabled for all 
departments. When you select [OFF], unlimited outputs will be 
allowed for all departments.

Memo

When you select [ON] in this operation, the quota settings for 
all department codes are set to “0”. If you want to change the 
quota settings for each department code, perform the settings 
individually for each code.

P.220 "Logging on as administrator"

1

On the DEPT. MANAGEMENT menu screen, 
press [ALL LIMIT].

The ALL LIMIT screen is displayed.

Memo

• For instructions on how to display the DEPT. 

MANAGEMENT menu screen, see the following page:

P.220 "Logging on as administrator"

2

Enable or disable the All Limit function, and 
then press [OK].

The All Limit function is enabled or disabled by pressing 
[ON] or [OFF].

Содержание e-Studio477s









































































































































































































































































Отзывы:

Нет отзывов