manualshive.com logo in svg

Toshiba e-Studio477s, Руководство для продвинутых пользователей, Страница: 165 / 264

Поделиться
Скачать
Toshiba e-Studio477s Скачать руководство пользователя страница 165

SETTING ITEMS (ADMIN)

- 165 -

2

1

3

4

5

6

7

Setting the Auto Power Save mode

1

On the POWER SAVE screen, press [AUTO 
POWER SAVE].

The AUTO POWER SAVE screen is displayed.

2

Press the desired period of time (in 
minutes) that this equipment should wait 
before the Power Save mode is activated.

The Auto Power Save mode setting is completed, and 
you will be returned to the previous screen.

Setting the Auto Sleep mode

1

On the POWER SAVE screen, press [AUTO 
SLEEP].

The AUTO SLEEP screen is displayed.

2

Specify the following items as required and 
complete the setting.

*1 The target options are as follows:

- Wireless LAN Module
- e-BRIDGE ID Gate
- IPsec Enabler
- Data Overwrite Enabler

*2 The target protocols are IPX/SPX, AppleTalk and so on. For 

details, refer to the TopAccess Guide “Chapter 8: 
[Administration] Tab Page - [Setup] Item List”.

Note

• The equipment may not enter the Sleep mode at the 

set timing depending on its operating status.

• The machine is not switched to the Sleep mode in the 

following cases:

- A particular option is installed. (Wireless LAN 

module, e-BRIDGE ID Gate)

- The IPsec function is enabled.

- IEEE 802.1X authentication is enabled.

- IPv6 is enabled and the IPv6 address is set other 

than manually.

- POP3 client setting is enabled and under any of the 

following conditions:

- (1) The scan rate is set to other than 0 minute.

- (2) A POP3 server address is entered.

- (3) An account name is entered.

- A particular network protocol is enabled. (AppleTalk, 

IPX/SPX)

• Protocol settings for recovering this equipment from 

the Auto Sleep mode are made in the TopAccess 

administrator mode. For details, refer to the 

TopAccess Guide “Chapter 8: [Administration] Tab 

Page”

.

• By default, the Power Save period is set to 1 min and 

the Sleep period is set to 1 min.

Item name

Description

SLEEP TIMER

Press the desired period of time (in 
minutes) that this equipment 
should wait before the Sleep mode 
is activated.

SLEEP MODE

Select the AUTO, SLEEP, or 
POWER OFF mode after the 
specified [SLEEP TIMER] time.

POWER OFF

The equipment enters the status 
equivalent to shutdown. The 
equipment recovers by pressing 
the [POWER] button.

AUTO

In the following conditions, the 
equipment behaves in the same 
manner as in the [SLEEP] mode.

• A LAN cable is connected to the 

equipment

• A Wireless LAN Module is 

installed and enabled

• A FAX unit is installed

In conditions other than those listed 
above, the equipment behaves in 
the same manner as in the 
[POWER OFF] status.

SLEEP

If the following conditions are met, 
the equipment is in the SLEEP 
mode and only the green MAIN 
POWER lamp lights.
Condition 1: Particular options are 
not installed 

*1

Condition 2: Particular protocols 
are disabled 

*2

Condition 3: The SECURE 
RECEIVE function of the fax 
setting is disabled.
To recover, press the [POWER] 
button. The equipment recovers 
when the print data are received 
via the LAN cable or a fax is 
received.
In conditions other than those listed 
above, the display on the touch 
panel is turned off, and the 
equipment is in the SLEEP mode 
and the green [ENERGY SAVER] 
button lights.
To recover, press one of the 
following buttons:

• [START], [ENERGY SAVER, 

COPY], [e-FILING], [SCAN], 
[PRINT], or [FAX]

The equipment recovers from the 
SLEEP mode when the print data 
are received via the LAN cable or a 
fax is received.

Item name

Description

Содержание e-Studio477s









































































































































































































































































Отзывы:

Нет отзывов