manualshive.com logo in svg

Toshiba e-Studio477s, Руководство для продвинутых пользователей, Страница: 61 / 264

Поделиться
Скачать
Toshiba e-Studio477s Скачать руководство пользователя страница 61

SETTING ITEMS

- 61 -

2

1

3

4

5

6

7

ORIGINAL MODE

Set the scanning mode based on the type of the original.

Memo

• In the TEXT/PHOTO mode or PHOTO mode, 

transmission time may be longer than in the TEXT 
mode.

TX TYPE

Set the fax transmission mode.

SECURE RECEIVE FORCED SETTING

You can enable or disable the SECURE RECEIVE 
function.
This is available only when the WEEKLY SCHEDULE 
function is set.
ENABLE: This enables the SECURE RECEIVE function.

Memo

• It becomes disabled at the time set by WEEKLY 

SCHEDULE.

DISABLE: This disables the SECURE RECEIVE function.

Memo

• It becomes enabled at the time set by WEEKLY 

SCHEDULE.

• An administrator password is required.

EXPOSURE

Set the density at which the original is to be scanned.

RTI

Switch the RTI recording ON or OFF. To enable this 
feature, the Terminal ID must be registered to this 
equipment in advance.

P.62 "Registering the terminal ID"

TTI

Switch the TTI recording ON or OFF. To enable this 
feature, the Terminal ID must be registered to this 
equipment in advance.

P.62 "Registering the terminal ID"

Memo

• Setting this item may not be required since it may not 

be displayed on the screen (it depends on your 
country or region).

ECM

Switch the ECM (Error Correction Mode) communication 
ON or OFF.
ECM is an internationally standardized communication 
mode that automatically corrects errors that occur during 
fax transmissions. With this setting option ON, even when 
the transmitted data have been affected by noise during 
communication, this mode allows good communication 
without image distortion by automatically resending the 
part that have been affected.

Memo

• Both the sender and the receiver must have the ECM 

function to make ECM communication available.

• When affected by noise during communication, 

communication time is slightly longer than usual. Even 
when the ECM communication is used, an error may 
occur depending on the line status.

• The ECM communication is not available for voice 

communication.

PREVIEW SETTING

Switch the preview setting ON or OFF.

INITIAL PREVIEW TYPE

Set the preview type to be displayed as an initial

MULTIDEST. CONFIRMATION

Selects whether to display the confirmation screen when 
multiple destinations are specified.

TX SPEED LIMIT

The transmission with V.34 may fail depending on the 
communication quality of your line. Transmission failures 
may be avoided when this setting is set to ON.

RX SPEED LIMIT

The reception with V.34 may fail depending on the 
communication quality of your line. Reception failures 
may be avoided when this setting is set to ON.

TEXT:

This is suitable for an original with text 
and line drawings.

TEXT/PHOTO: This is suitable for an original with a 

mixture of text and photos.

PHOTO:

This is suitable for an original with 
photos.

MEMORY TX:

Send the original after the scanned 
data are saved in the memory. Up to 
100 transmissions of up to 1000 
pages per 1 transmission can be 
reserved.

DIRECT TX:

Send the original directly as it is being 
scanned. Once a page has been 
scanned and sent, the next page is 
scanned and sent. Therefore, it takes 
longer to scan and send all pages. 
However, you can confirm on the fly 
that each page is sent to the recipient.

AUTO:

This equipment automatically detects 
the contrast of the original, and scans 
it with the optimum contrast.

MANUAL:

Press 

 or 

 to set the desired 

contrast.

Содержание e-Studio477s









































































































































































































































































Отзывы:

Нет отзывов