manualshive.com logo in svg

Toshiba e-Studio477s, Руководство для продвинутых пользователей, Страница: 169 / 264

Поделиться
Скачать
Toshiba e-Studio477s Скачать руководство пользователя страница 169

SETTING ITEMS (ADMIN)

- 169 -

2

1

3

4

5

6

7

3

Select the language pack that you want to 
install, and press [INSTALL].

The installation confirmation screen is displayed.

4

Press [YES].

The installation begins.

Note

• Do not remove the USB storage device until the data 

transfer is complete. Removing the device while data 
are being transferred could destroy them or cause a 
malfunction of the equipment.

5

When the installation is complete, press 
[OK].

You will be returned to the GENERAL menu (2/2).

Memo

• If the installation fails, the message “Installation 

Failed.” will be displayed on the CAUTION screen. In 
this case, press [CLOSE], and perform the operation 
again.

6

Remove the USB storage device from the 
USB port on the equipment.

Removing a language

1

On the LANGUAGES screen, select the 
language pack that you want to remove, 
and press [DELETE].

The deletion confirmation screen is displayed.

Note

• The language packs for English (US), English (UK), 

and the default language cannot be removed.

2

Press [YES].

When the language pack is removed, you will be returned 
to the LANGUAGES screen.

Содержание e-Studio477s









































































































































































































































































Отзывы:

Нет отзывов