Toshiba e-studio205L, Руководство по обслуживанию, Страница: 156 / 672

e-STUDIO205L/255/305/355/455 © 2009 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSIS MODES
2 - 128
1140 User
interface
Restriction of the
template function with
the administrator
privilege
ALL 0
<0-1>
SYS Selects the restriction of
the template function
usage setting.
0: No restriction
1: Only available with
the administrator
privilege.
1
1141 Network Display of MAC address ALL - SYS (**:**:**:**:**:**)
The address is
displayed as above (6-
byte data is divided by a
colon at every 1 byte).
2
1145 Maintena
nce
(Remote)
Counter notification
Remote FAX setting
ALL - SYS Maximum 32 digits
Enter hyphen with the
[PAUSE] button.
11
1149 General Enhanced bold for PCL6 ALL 0
<0-1>
SYS 0:OFF
1:ON
1
1372 Counter Heater and energizing
time accumulating
counter Display/0
clearing
ALL 0
<8 digits>
M Counts up the heater
control time
accumulated (when
power of the equipment
is ON) but does not
count at the Sleep
Mode. When the
counter value of the
fuser roller is cleared,
this counter value is
also cleared in sync at
the PM support mode.
1
1378 Counter Counter for period of
time fuser unit is at ready
temperature
ALL 0
<8 digits>
M Counts up the heater
control time
accumulated (when the
equipment is at ready
status).
When the counter value
of the fuser roller is
reset, this counter is
also reset in sync at the
PM support mode.
1
1380 Counter Counter for period of
time fuser unit is at
printing temperature
ALL 0
<8 digits>
M Counts up the heater
control time
accumulated (during
printing).
When the counter value
of the fuser roller is
reset, this counter is
also reset in sync at the
PM support mode.
1
1382 Counter Counter for period of
time fuser unit is at
energy saving
temperature/Counter
reset
ALL 0
<8 digits>
M Counts up the heater
control time
accumulated (when the
equipment is in the
Energy Saving Mode).
When the counter value
of the fuser roller is
reset, this counter is
also reset in sync at the
PM support mode.
1
Setting mode (08)
Code
Classific
ation
Items
Functi
on
Default
<Acceptable
value>
Boa
rd
Contents
Proce
dure