Toshiba e-studio 2040c Скачать руководство пользователя страница 98

Страница: 98 / 338

e-STUDIO2040C/2540C/3040C/3540C/4540C

2 - 57

2. Copier-specific Adjustments

(1) Perform automatic calibration for each paper type to correct variations in image density.

* A privilege to perform automatic calibration is set to Administrator by default but this can be changed to

the User. For how to change the privilege, refer to the MFP Management Guide.

• Follow steps (a) through (j) to perform the automatic calibration.

(a) Enter the setting mode [08]. Change the value of the code [9059] to “1” so that automatic calibration

for each paper type will be enabled.

Value for 08-9059

Display for user calibration

Not displayed (default)

1 Displayed

(b) Press the [USER FUNCTIONS] button on the Control Panel to enter the “User Functions” menu.

(d) Enter an administrator password in 6 to 10 digits. Press the [ENTER] button.

(e) Press the [GENERAL] button.

(f) Press the [CALIBRATION] button.

(g) Press the [COPY] button.

(h) Press the [CALIBRATION] button to print a test chart.

(i) Place the printed test chart on the original glass.

(j) Press the [START] button to start the calibration. The message “WAIT” disappears when the

calibration is finished.

* The procedure above covers both the color and black copy calibration.

After the automatic calibration, copy and check the image quality.

If further image quality adjustment is necessary, go to the next step.

(2) Enter adjustment mode [05]. Change the values for codes [7913] to adjust the amount of toner used.

• The code to use varies according to the paper type. Adjust the value for [05] code corresponding to the

paper type for whose image quality you would like to improve and increase the value to obtain the copy

density that the user desires.

• In the [7913] setting, the toner amount of Y, M, C and K single color is not changed, but that of the

overlaid color (RGBK) is controlled.

Paper type

[05] code

Subcode

Recommended

value

Acceptable

value range

Default

Thick 1

Thick 2

Thick 3

Thick 4

SPECIAL 1

SPECIAL 2

OHP

05-7913

128

0 to 255

128

* Set the value in increments of approximately 4, while checking the copy image until the optimum value is

obtained.

Содержание e-studio 2040c



















































































































































































































































































































































Результаты поиска

Содержание e-studio 2040c

Отзывы:

Toshiba e-studio 2040c, Руководство по визуализации, Страница: 98 / 338

Результаты поиска

Содержание e-studio 2040c

Отзывы: