Toshiba e-studio 2040c Скачать руководство пользователя страница 298

Страница: 298 / 338

e-STUDIO2040C/2540C/3040C/3540C/4540C

6 - 5

6. Printer-specific Adjustments (GA-1211)

Methods of calibration for GA-1211

Method

Measurement device (interface)

Feature

DTP-32

X-Rite DTP32 automatic densitometer
(RS-232C)

DTP32 Series II

X-Rite DTP32 Series II automatic densitometer
(RS-232C)

DTP41 Calibration

X-Rite DTP41 automatic spectrophotometer
(RS-232C)

ES-1000 *

Spectrophotometer ES-1000 hand-held
spectrophotometer (USB)

The accuracy of
calibration is
upgraded due to the
use of a measurement
device.

ColorCal

The copier’s built-in scanner and the Kodak
grayscale appended to GA-1211.

The more
detailed
setting is
available with
the PC

Calibrating from the
copier touch panel

The copier’s built-in scanner and the Kodak
grayscale appended to GA-1211.

Calibration is
performed easily
because the scanner
function of the MFP
is used but any
measurement device
is not used.

The setting is
easily
performed
from the MFP
touch panel.

* ES-1000 above is an optional device of EFI, which is originally manufactured by Gretag Macbeth (I1) but

customized exclusively for EFI. The ES-1000 is hardware key for optional EFI Color Profiler or Spot-On,

and these options will not be started unless the ES-1000 is connected to them.

Simple calibration (ColorCal)

ColorCal enables calibration for the GA-1211 by measuring the toner density using the built-in scanner of the

MFP, without preparing any expensive measurement devices such as spectrometers or densitometers.

ColorCal can be operated by starting Calibrator on a computer connected to the MFP, or from the control

panel of the MFP without a computer. Note that the accuracy of the calibration with ColorCal is lower than

that of calibration with a measurement device because the built-in scanner of the MFP is not originally

developed as a measurement device. If problems such as false contour, color spots in gray areas or color

imbalance occurred after calibration with ColorCal, such problems are often resolved by recalibrating with a

measurement device such as DTP-32 or ES-1000.

The differences between the ColorCal calibrations from the touch panel of the MFP and from Calibrator are

shown below.

Содержание e-studio 2040c



















































































































































































































































































































































Результаты поиска

Содержание e-studio 2040c

Отзывы:

Toshiba e-studio 2040c, Руководство по визуализации, Страница: 298 / 338

Результаты поиска

Содержание e-studio 2040c

Отзывы: