Toshiba e-studio 2040c Скачать руководство пользователя страница 276

Страница: 276 / 338

e-STUDIO2040C/2540C/3040C/3540C/4540C

5 - 5

5. Scanning-specific Adjustments

5.3 To Clearly Scan and Print an Original in Black and White

(To improve gradation and reduce graininess)

Before the adjustment

After the adjustment

If the original is scanned in the Black mode,
the halftones may become blurred in black.

The halftones of the scanned-in image are
clearly printed out.

Explanation

If an original is scanned in the Black mode, a difference in the density level of the halftones cannot be accurately

scanned. As a result, it may become blurred in black or grained. Scan a black-and-white original in the Gray

scale mode, in order to scan and print it out in black and white more clearly.

Procedures

* Both the service technician and the user can perform all adjustments.

(1) When scanning the original, press the [SCAN SETTING] button on the Control Panel. Select "IMAGE

SMOOTHING" from among the color mode options.

Precautions after the completion of the adjustment

The adjustment may possibly increase the size of the file to be stored. Therefore, carefully perform the

adjustment, while checking the scanned-in image quality. The correlation between color mode and file size is as

described below. (The ratio of the file size may vary depending on the type of original. Therefore, use the

description below just for your reference.)

* Ratio of the file size in the Black mode to the Gray scale mode

• If the file size in the Black mode with the Text mode selected is 1, it will be increased to approximately 7 times

in the Gray scale mode.

• If the file size in the Black mode with the Photo mode selected is 1, it will be approximately doubled in the

Gray scale mode.

Содержание e-studio 2040c



















































































































































































































































































































































Результаты поиска

Содержание e-studio 2040c

Отзывы:

Toshiba e-studio 2040c, Руководство по визуализации, Страница: 276 / 338

Результаты поиска

Содержание e-studio 2040c

Отзывы: