Toshiba e-studio 2040c Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 338

Toshiba e-studio 2040c Скачать руководство пользователя страница 54

e-STUDIO2040C/2540C/3040C/3540C/4540C

© 2011 TOSHIBA TEC CORPORATION All rights reserved

2 - 13

2. Copier-specific Adjustments

2.3 To Improve the Reproducibility of Gray

Before the adjustment

After the adjustment

Another color (M) is blended in the gray area.

No undesired color is blended. A clear copy
image is obtained.

Explanation

When an original containing gray is copied, another color may be blended in the gray area. Perform image quality
control, automatic calibration, color adjustment (color balance adjustment or RGB adjustment) and color density
adjustment, in order to avoid this problem (or to obtain an achromatic color, for instance).

Procedures

* You can start with any of the procedures. But it is recommended to perform the procedures in order, as listed

below. You can use one procedure in conjunction with another. But if this changes the image quality more
than required or loses the effectiveness of the adjustment, restore the settings made in the previously used
procedure to the original ones. Then use other procedures.

* Only the service technician must use procedures (1) and (4).
* Both the service technician and the user can use procedures (2) and (3).

(1) Enter adjustment mode [05]. Select code [2742]. Press the [START] button.

•

Image quality control will be forcibly performed to correct the color balance and copy density.

After exercising image quality control, copy and check the copy image quality.

If further image quality adjustments are still necessary, use the next procedure.

(2) Perform automatic calibration to correct variations in the copy density.

* For further information regarding the adjustment procedures, refer to procedure (2) in 2.2 To Closely

Match the Color Balance of the Original.

* [ADMIN] is selected from among the [CALIBRATION DISPLAY LEVEL] options by default. In other

words, an administrator is authorized to operate automatic calibration. But the [USER] option can also be
selected to allow the user to operate it. Refer to the MFP Management Guide for further information
regarding how to select the [CALIBRATION DISPLAY LEVEL] option.

After performing automatic calibration, copy and check the copy image quality.

If further image quality adjustments are still necessary, use the next procedure.

«
...
52
53
54
55
56
...
»

Содержание e-studio 2040c



















































































































































































































































































































































Отзывы:

Нет отзывов