Toshiba e-studio 2040c Скачать руководство пользователя страница 295

Страница: 295 / 338

e-STUDIO2040C/2540C/3040C/3540C/4540C

6 - 2

6. Printer-specific Adjustments (GA-1211)

Procedures

* Perform the adjustment in accordance with the procedures below.

* Both the service technician and the system administrator can use all the procedures.

* All the adjustments will be effective only when images are printed with a PS3 printer driver in the Full color

mode.

(1) Perform automatic calibration for the printer engine in the MFP.

* For procedures for automatic calibration, refer to procedure (2) in “3.1 To Maintain a Steady Color Balance”.

(2) Perform calibration for the GA-1211.

* For procedures for calibration, refer to 6.1.1 and subsequent sections.

6.1.1 To Check Calibration History

Explanation

Check the image quality of printed images (e.g. test charts or images printed from a computer) and calibration

history in order to judge the necessity of calibration.

There are two methods to check the day that calibration was performed; one is to print the Configuration Page and

another is to start the Calibrator of client and check what is displayed in the Media field on Calibration Set when

the desired media type is placed. Or you can print a PS test chart for checking image quality. However, on the PS

test chart you can check calibration history only for plain paper and cannot check the one for thick paper or special

paper, while it is convenient for checking actual images.

To check printed images for media types other than plain paper, print the desired image on a media type to be

checked, and then check visually if the color balance is satisfactory.

Calibrator

Information of the last calibration performed for the selected

media type

• Media:

Media type

• Measured:

Date of calibration

• By User:

A person performed the calibration

• Method:

Calibration method

Содержание e-studio 2040c



















































































































































































































































































































































Результаты поиска

Содержание e-studio 2040c

Отзывы:

Toshiba e-studio 2040c, Руководство по визуализации, Страница: 295 / 338

Результаты поиска

Содержание e-studio 2040c

Отзывы: