Toshiba e-studio 2040c Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 338

Toshiba e-studio 2040c Скачать руководство пользователя страница 32

e-STUDIO2040C/2540C/3040C/3540C/4540C

© 2011 TOSHIBA TEC CORPORATION All rights reserved

1 - 19

1. General Adjustments – Copying, Printing and e-Filing (Output from Box)

A large number of sheets are printed (hundreds of copies or more per day) and the image
quality needs to be constantly maintained:

Change the value for code 08-2509 to reduce the accumulated number of printed sheets. It will determine
the interval until the next image quality control is performed.

* After a copy or print job is completed, if the accumulated number of printed sheets exceeds the specified

value, image quality control will be performed.

Value for 08-2509

Accumulated number of printed sheets before image quality control is

performed

50 to 999

50 to 999 sheets

1000

1000

sheets (default)

After setting the value for code 08-2509, forcibly perform image quality control, as follows:

Enter adjustment mode [05]. Select code [2742]. Press the [START] button.

After performing the adjustment, print and check the image quality.

After performing the adjustment, print and check the image quality.

If further image quality adjustments are still necessary, use the next procedure.

The image quality needs to be constantly maintained in continuous printing:

Since image control cannot be performed without a printing interruption, if the number of sheets for 08-
2509 is set to 500 or less, do so also for 08-9199.

Value for 08-2509

Accumulated number of printed sheets before image quality control is

performed

50 to 200

50 to 200 sheets

1000

1000

sheets (default)

Value for 08-9199

Accumulated number of printed sheets before image quality control is

performed

50 to 499

50 to 499 sheets

500

500 sheets (default)

<Notes>

• To ensure stability, it is recommended to set 1/3 to 1/5 of the number of continuous printing, though the

printing performance deteriorates.

• Since the life of consumables such as the cleaning blade is affected, do not set to less than 50 sheets for 08-

2509 and 08-9199.

• The image stability will be improved by changing the setting. However, long-time usage affects the life of

consumables. It is recommended to make a minimal change amount or to return to the default value

immediately.

• If 08-2367 (ON/OFF setting of drum and belt reverse rotation amount control) is set to "0", there is no effect

because image control is not performed even with a printing interruption and any setting number of 08-2509

and 08-9199.

«
...
30
31
32
33
34
...
»

Содержание e-studio 2040c



















































































































































































































































































































































Отзывы:

Нет отзывов