EN
In
troducti
on
Connecti
o
ns
Bas
ic Setup
P
layback
Ed
iti
n
g
V
CR Fu
ncti
on
s
Ot
hers
Fu
nc
ti
on
Set
u
p
Recordi
n
g
85
Playback
1
Press [
ON / STANDBY] to turn on
the unit.
To play back a tape, turn on the TV and be sure to
select the input to which the unit is connected.
2
Press [VCR].
3
Insert a pre-recorded tape, then
press [PLAY
P
] to start playback.
4
During playback, press [PAUSE
p
].
Playback will be paused and sound will be muted.
5
Press [PLAY
P
] to resume playback.
6
Press [STOP
S
] to stop playback.
7
Press [OPEN / CLOSE
O
] to eject the
tape.
Note
• When a tape without record tab is inserted, the unit
will start playback automatically.
• Tracking will be automatically adjusted upon
playback. To adjust the tracking manually, press
[PROG.
/ ]
.
Recording and One-touch Timer
Recording (OTR)
Basic Recording
Before recording, make sure:
• The desired channel is selected by pressing
[the Number buttons]
or
[PROG.
/ ]
on the
remote control.
• There is a tape with a record tab in the unit.
• Refer to pages 41 to 42 for instructions on timer
recording.
1
Turn on the unit and insert a
recordable tape.
Make sure that the TV input is set on the unit.
2
Press [VCR].
3
Select the recording mode using
[REC MODE].
• The desired recording mode is selected in SP
(standard play) or LP (long play) mode by
pressing
[REC MODE]
.
4
Select the desired channel to record
using [PROG.
/
] or
[the Number buttons].
5
Press [REC
I
] to start recording.
To temporarily stop recording or to resume it,
press
[PAUSE
p
].
After the unit has been in pause mode for 5
minutes, it will stop automatically to protect the
tape and the video head from damage.
6
Press [STOP
S
] when the recording
is completed.
VCR Functions
VCR
VCR
Tape speed
Recording / Playback Time
Type of tape
E60
E120
E180
E240
SP mode
1 hour
2 hours
3 hours
4 hours
LP mode
2 hours
4 hours
6 hours
8 hours
VCR
VCR
E9NG1BD_EN.book Page 85 Monday, April 7, 2008 5:54 PM