47
EN
47
EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
7
Press [STOP
C
] to stop recording.
The recorded title will be included in the title list.
(Refer to “Guide to a Title List” on page 78.)
Wait for a moment
90%
This operation may take
awhile to be completed.
6
Press [REC
I
] to start recording.
“
I
” will be displayed for 5 seconds.
I
Press
[PAUSE
F
]
to pause recording.
Press
[PAUSE
F]
]
or
[REC
I
]
again to restart
recording.
To set one-touch timer recording (OTR)...
This is a simple way to set the recording time in blocks
of 30 minutes.
Press
[REC
I
]
repeatedly until the desired recording
time (30 minutes to 8 hours) appears on the TV screen.
One-touch timer recording will start.
0:30
(normal recording)
8:00
7:30
1:00
I
0:30
• To change the recording length during one-touch
timer recording, press
[REC
I
]
repeatedly until the
desired length appears.
• To cancel one-touch timer recording within the
specified time, press
[STOP
C
]
.
Note
• When you press
[REC
I
]
,
recording starts immediately and continues until the disc is full or you stop recording.
• When the unit clock has not been set, the space for a date and time of title names will be blank.
• When you record a TV program onto DVD-RW, DVD-R or DVD+RW/+R, you have to select the TV channel audio
beforehand. Only the selected channel audio will be recorded. Refer to “Selecting TV Audio” on pages 32-33 for
more details.
• You cannot change the recording mode during the recording pause mode.
• You can change a channel to be recorded during the recording pause mode.
Note for one-touch timer recording
• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press
[DISPLAY]
to see it on the TV screen.
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning off the power (One-touch timer recording will be canceled.).
- Using
[REC
I
]
or
[STOP
C
]
on the remote control.
• You cannot use the pause function during one-touch timer recording.
• When one-touch timer recording is finished and the power is turned off, the unit will switch to the timer-standby
mode automatically if a timer recording has been programmed. Press
[I/
y
y
ON/STANDBY]
to cancel the timer-
standby mode to use the unit continuously.
E7M70UD_D-R560KU_EN.indd 47
E7M70UD_D-R560KU_EN.indd 47
2008/01/10 17:28:08
2008/01/10 17:28:08
