Toshiba B-FP2D Series, Спецификация ключевых операций

Страница: 87 / 127

-81-
7.5.2 X-coordinate Fine Adjustment (X Adjust)
This setting sets an amount by which the X-coordinate is shifted to the left or right.
Max.
value
Min. value Step Display Sign Integer
digit
Decimal
place
0-padding Unit of
measure
+99.9 -99.9
0.1 Decimal Exist 2 1 None mm
Default value: 0.0mm
<Supplemental Explanations>
(1) The X-coordinate fine adjustment setting is performed to finely shift the x-coordinate of graphic data to the
right or left. This fine adjustment is performed within the effective print width range. (When the
X-coordinate is shifted in the minus direction and reaches its origin (0), it cannot be further shifted and stays
at the origin.)
(2) This fine adjustment is disabled for self-test print (maintenance counter values, various parameter values,
and automatic self-test) and test print.
Support mode (o
：
valid
、
x
：
invalid
）
TPCL, TPCL1,
LABEL C Mode ESC/POS
RECEIPT,RECEIPT1 Z Mode S Mode
o x x x x
+
–
XYZ
Paper
Feed
Direction