2. PRINTER SETUP
ENGLISH VERSION EO1-33094
2.3 Loading Supplies
E2- 8
2.3.1 Loading the Media
(Cont.)
12.
Batch mode
In batch mode, the media is continuously printed until the number of
labels/tags specified in the issue command has been printed.
13.
Loading with peel off module
When the optional Strip Module is fitted, the label is automatically
removed from the backing paper at the Strip Plate as each label is
printed.
(1) Remove enough labels from the leading edge of the media to leave
500mm of backing paper free.
(2) Insert the backing paper under the Strip Plate.
(3) Wind the backing paper onto the Take-up Spool and fix it in position
with the Take-up Clip. (Wind the paper counter-clockwise around
the spool.)
(4) Rotate the Take-up Spool counter-clockwise a few times to remove
any slack in the backing paper.
(5) Set the Selection Switch mounted on the Rewinder Assembly to
STANDARD/PEEL OFF
position.
NOTES:
1. Be sure to set the Selection
Switch to
STANDARD/
PEEL OFF
position.
2. The backing paper is easier
to feed back to the Take-Up
Spool if the Front Plate is
removed.
3. Fit the Take-Up Clip so that
the longer side of the clip is
fitted into the shallow groove
in the Take-Up Spool.
4. The backing paper can be
wound directly onto the
Take-up Spool or a paper
core.
Backing Paper
Strip Plate
Take-up Spool
Take-up Clip
