Toshiba B-EX4T1-T JP, Руководство по эксплуатации

Страница: 70 / 115

Program file
Click [Add] to open the file selection screen. Select a BASIC system mode program, click [Open],
then the full path of the file is displayed.
The [BASIC System Mode Program] does not become effective unless a file is selected.
When reading a file or creating download data failed, the error message is displayed.
[Z Mode System parameter file]
Select whether or not to download the BASIC data file.
The system parameter file is downloaded to the specified block of the printer memory.
Starting block
Specify the area where the program is stored.
Set a value so that the area does not overlap the other blocks.
Default
Other than B-EX4T2-H (600dpi) : 3
B-EX4T2-H (600dpi) : 2
Range 0 to 23
Data file
Click the Add button to open the file selection screen. Select a BASIC data file, click [Open], then
the full path of the file is displayed.
The [System parameter file] does not become effective unless a file is selected.
When reading a file or creating download data failed, the error message is displayed.
[Z Mode Initial values & table file]
Select whether or not to download the BASIC data file.
The Initial values & table file is downloaded to the specified block of the printer memory.
Starting block
Specify the area where the program is stored.
Set a value so that the area does not overlap the other blocks.
Default
Other than B-EX4T2-H (600dpi) : 4
B-EX4T2-H (600dpi) : 3
Range 0 to 23
Data file
Click the Add button to open the file selection screen. Select a BASIC data file, click [Open], then
the full path of the file is displayed.
The [Initial values & table file] does not become effective unless a file is selected.
When reading a file or creating download data failed, the error message is displayed.
[D Mode Initial values file]
Select whether or not to download the BASIC data file.
The Initial values & table file is downloaded to the specified block of the printer memory.
Starting block
Specify the area where the program is stored.
Set a value so that the area does not overlap the other blocks.
Default 5
Range 0 to 23
Data file
Click the Add button to open the file selection screen. Select a BASIC data file, click [Open], then
the full path of the file is displayed.
The [Initial values file] does not become effective unless a file is selected.
When reading a file or creating download data failed, the error message is displayed.
[MODE ON/OFF]
Select whether or not to sends the emulation mode ON/OFF command.