Toshiba B-EX4T1-T JP, Руководство по эксплуатации

Страница: 40 / 115

[Transmissive Sensor Threshold 1 to 5]: (B-EX4T3-H (600dpi))
Sets a fine adjustment value for the threshold to the transmissive sensor output in units of 0.1 V.
Up to 5 threshold fine adjustment values can be registered to Transmissive Sensor Threshold 1 to 5
for different media to be used.
Default 1.4 V
Range 0.1 to 4.0 V
[Ribbon Adjustment] Group
[Ribbon Width]: (Other than B-EX4D2-G/T (203dpi/300dpi) / B-EX4T1-T JP (305dpi) / B-EX4T3-H
(600dpi))
Selects the width of a ribbon.
Default TYPE1
Options TYPE1 (Standard), TYPE2 (Narrow)
[Drive Voltage (Take-up)]: (B-EX4T1-T JP (305dpi) / B-EX4T3-H (600dpi))
Sets fine adjustment of the ribbon take-up motor voltage (torque).
The fine adjustment value set by the Ribbon Motor Drive Voltage Fine Adjust command [RM] is
displayed in the left box.
When the parameter is not retrieved, the value in the left box becomes zero (0).
Default 0
Range -15 to +10
[Drive Voltage 1 (Take-up)]: (Other than B-EX4T1-T JP (305dpi) / B-EX4T3-H (600dpi))
Sets fine adjustment of the ribbon take-up motor voltage (torque).
This setting is used when Ribbon Width is TYPE1.
The fine adjustment value set by the Ribbon Motor Drive Voltage Fine Adjust command [RM] is
displayed in the left box.
When the parameter is not retrieved, the value in the left box becomes zero (0).
Default 0
Range -15 to +10
[Drive Voltage (Feed)]: (B-EX4T1-T JP (305dpi) / B-EX4T3-H (600dpi))
Sets fine adjustment of the ribbon feed motor voltage (torque).
The fine adjustment value set by the Ribbon Motor Drive Voltage Fine Adjust command [RM] is
displayed in the left box.
When the parameter is not retrieved, the value in the left box becomes zero (0).
Default 0
Range -15 to +10
[Drive Voltage 1 (Feed)]: (Other than B-EX4T1-T JP (305dpi) / B-EX4T3-H (600dpi))
Sets fine adjustment of the ribbon feed motor voltage (torque).
This setting is used when Ribbon Width is TYPE1.
The fine adjustment value set by the Ribbon Motor Drive Voltage Fine Adjust command [RM] is
displayed in the left box.
When the parameter is not retrieved, the value in the left box becomes zero (0).
Default 0
Range -15 to +10
[Drive Voltage 2 (Take-up)]: (Other than B-EX4D2-G/T (203dpi/300dpi) / B-EX4T1-T JP (305dpi) /
B-EX4T3-H (600dpi))
Sets fine adjustment of the ribbon take-up motor voltage (torque).
This setting is used when Ribbon Width is TYPE2.
The fine adjustment value set by the Ribbon Motor Drive Voltage Fine Adjust command [RM] is
displayed in the left box.
When the parameter is not retrieved, the value in the left box becomes zero (0).
Default 0
Range -15 to +10