18
BEFORE CALLING THE SERVICEMAN
Error Indication List
In the case the buzzer sounds and the display indicates as shown below.
WHEN
CHECK
TREATMENT
•
Is there a power outage?
•
Is the circuit breaker or fuses cut off?
•
Is the machine’s plug properly inserted into
an AC socket?
•
Is the power switch ON?
•
Is there the inclination of the laundry?
•
Is your washing machine installed on an
inclined or uneven surface?
•
Are there match sticks, hairpins or metal
objects being washed with the laundry?
•
Is the faucet shape suited?
•
Are the hose coupling and the nozzle loose?
•
Is the hose nut loose?
•
Is the water supply hose connector clogged?
•
If you turn the power on and press
button immediately, it may not beep the end
buzzer.
•
Is the end buzzer turned off?
does not operate
making noise
water leak
does not beep the
end buzzer
Please confi rm whether a power failure or
fuse breaker is cut. Then draw out power
supply plug, insert once again and turn the
power switch on.
Please correct the inclination or non stability
of laundry in the washing machine.
Remove them.
Adjust the inside ring of the hose union or
change faucet shape (Refer to p. 15)
Re-attaching the water (Refer to p. 15)
Re-attaching the water supply hose (Refer
to p. 15)
Reset the end buzzer sound to turn on refer-
ring to “If you wish to turn off the end buzzer
sound. (p. 12)”
CHECK
TREATMENT
About the drainage hose
•
Is the hose mounted correctly?
•
Is the hose routed horizontally?
•
Is the hose frozen?
•
Is the hose damaged? Is the end exposed to water?
•
Is the drainage hose clogged?
•
Is the lid open?
•
Is the lid lock stuck with any foreign materials?
•
Is the lid completely closed?
•
Is the lid completely locked?
•
Is the laundry loaded evenly?
•
Is the laundry unstable or placed on an incline
fl oor?
•
Are there any symptoms occurring that are simi-
lar to those of
?
See the section of
above.
•
Is the faucet closed?
•
Is the water pipe frozen or the water service
interrupted?
•
Is the water fi lter/lint collector at the supply port
clogged with dirt? If the fl ow rate of the water is
as low as about 0.5L or less per minute, “E5” will
be displayed.
•
After checking, open and
close the lid once. Press the
button.
•
Close the lid.
•
Turn the power off for checking,
and then restart the machine.
•
Correct the load status of the
laundry and the backlash of the
machine, then close the lid.
•
After checking, open and
close the lid once, press the
button.
A
A
A
A
A
If the problem is not solved despite checking, unplug the power plug and request repair.
Display interchangeably
Display interchangeably
A
DISPLAY