background image

14

INSTALLATION

Install your washing machine in a level, stable place.

 It is dangerous to place the washing machine in an 

unstable location since it may move during vibration.

 It will increase the sound produced by the machine when 

it vibrates during use.

When you move washing machine, 
hold the handles on the sides.
There are moving parts, electrical 
parts and steel plates which may 
cause electrical shock or injury.

 Never touch on the cabinet bottom by hands.

  Never lift at the cabinet bottom by hands.

When the machine is covered.

Do not use the cover made of chloric vinyl. Sometimes it 
damages plastic parts and painted surface. When you use 
the cover made of chloric vinyl, put the cloth between the 
machine and the cover.

Avoid place where the machine is 
exposed to direct sunlight.

 Plastic parts may become 

  deformed or discolored.

Avoid places where the machine may become frozen 
during cold weather.

Allow a space of at least 5 cm from the sides and rear 
of the machine to the nearest vertical object.

 When placed too near to walls 

  or other objects, the vibration 
  of the machine during operation 
  may cause them to shake.

Choosing an installation location

Allow 5 cm

Leveling the washing machine

Installing the bottom cover

1  Push the cover into the washing machine from the 

backside.

2  Tighten screws at 2 positions.

Screw

Back side

Screw

 

 

 

 

 

 

Back side

   

   

 

Lower

Leg nut

Tighten

Loosen

Leg

Raise

 Check the distance.

String

Adjust the leg so that body of your washing machine keep flat. (The 

one

 leg 

is

 adjustable.)

1. After loosening the leg nut, adjust the leg to

the proper height by turning it. Then tighten
the leg nuts securely once again.

2. When the leg height is difficult to adjust because

of floor slope or unevenness, place a board of
sufficient thickness to prevent breakage under
the affected legs to allow adjustment to a level position.

3. A weight attached to a string may be used to

check to ensure that your washing machine is flat.
The difference of the distance between A and B
should be less then 1 cm.

A-B  or  B-A       1 cm.

Содержание AW-B1000GM





















Отзывы: