E6581542
①
- 14 -
4.3.1. LDI Point Descriptions
Table 7
Logical Digital Input (LDI)
Point Descriptions
Point
Number
Point
Name
Description
21
FWD.REV
Indicates the rotational direction of the motor, regardless of control source.
23
STOP.RUN
Indicates the run status of the drive, regardless of control source.
25
EXT1.2 ACT
Indicates whether channel 1 or channel 2 is the active control source.
27
DRIVE READY
Indicates the drive is ready to accept a run command.
28
AT SETPOINT
Indicates the drive has reached its commanded setpoint(
f101
､
f102
).
33
HANDAUTO ACT Indicates whether the drive is in local (HAND) or remote (AUTO) control.
36
FLN LOC ACT
Indicates if the drive has been placed in "FLN LOCAL" mode by commanding
either point 68 (FLN LOC CTL) or point 69 (FLN LOC REF). Commanding
either of these points to FLN "steals" control from its normal source and places
in under FLN control.
Note that the HAND mode of the panel has priority over FLN local control.
37
CTL SRC
Indicates if the FLN network is a source for control inputs.
38
FLN REF1 SRC
Indicates if the FLN network is the source for setpoint 1(Pno.60).
39
FLN REF2 SRC
Indicates if the FLN network is the source for setpoint 2(Pno.61).
70
DI 1 ACTUAL
Indicates the status of digital Input 1.
Depending on the status of the F terminal on the drive.
71
DI 2 ACTUAL
Indicates the status of digital Input 2.
Depending of the status of the R terminal on the drive.
72
(DI 3 ACTUAL)
Reserved (does not work).
73
DI 4 ACTUAL
Indicates the status of Digital Input 4 (1 = ON, 0 = OFF).
Depending on the status of the RES(
f114
) terminal on the drive.
74
DI 5 ACTUAL
Indicates the status of Digital Input 5 (1 = ON, 0 = OFF).
Depending on the status of the S1(
f115
) terminal on the drive.
75
DI 6 ACTUAL
Indicates the status of Digital Input 6 (1 = ON, 0 = OFF).
Depending on the status of the S2(
f116
) terminal on the drive.
76
DO 1 ACTUAL
Indicates the status of digital output 1.
Depending of the status of the FL(
f132
) terminal on the drive.
77
DO 2 ACTUAL
Indicates the status of digital output 2.
Depending of the status of the OUT1(
f130
) terminal of the drive.
78
DO 3 ACTUAL
Indicates the status of digital output 3 (1 = ON, 0 = OFF).
Depending of the status of the OUT2(
f131
) terminal on the drive.
79
DO 4 ACTUAL
Indicates the status of digital output 4 (1 = ON, 0 = OFF).
Depending of the status of the R2(
f138
) terminal on the drive.
80
DO 5 ACTUAL
Indicates the status of digital output 5 (1 = ON, 0 = OFF).
Depending of the status of the OUT5(
f136
) terminal on the drive.
81
DO 6 ACTUAL
Indicates the status of digital output 6 (1 = ON, 0 = OFF).
Depending of the status of the OUT6(
f137
) terminal on the drive.
86
OK.ALARM
Indicates the current alarm state of the drive.
93
OK.FAULT
Indicates the current fault state of the drive.
