38
Chapter 6: Basic features
Tuning channels
Setting the Channel Tuning Mode
This feature allows you to choose how tuning will be
handled for analog and digital channels when the TV is
in Antenna mode.
Note:
To use this feature,
ANT/CABLE In
must be set to
Antenna
(
-
page 35).
The channel tuning mode has three options.
To set the Channel Tuning Mode:
1
From the
SETUP
menu, highlight
TV Settings
and
press .
2
Press
B
or
b
to highlight
Channel Tuning Mode
.
3
Press
C
or
c
to select your desired mode and then
press .
Note:
The Channel Options window as well as the Channel
Browser ANT/CABLE List will be updated automatically
when you change the mode. Also, the History List will be
cleared, but the Favorites List will be saved.
Tuning to the next programmed
channel
To tune to the next programmed channel:
Press
<
or
,
on the remote control or TV control panel.
Note:
This feature will not work unless you program
channels into the TV’s channel memory (
-
page 35).
Tuning to a specific channel
(programmed or unprogrammed)
Tuning analog channels:
Press the Channel Number (0–9) on the remote control.
For example, to select channel 125, press 1, 2, 5, then
.
Tuning digital channels:
Enter the major Channel Number (0–9) on the remote
control, followed by the dash (
=
) button and then the
sub-channel number. For example, to select digital
channel 125-1, press 1, 2, 5, –, 1, then
.
Mode
Description
Standard
Both analog and digital channels can be
tuned normally
Auto
(default)
Digital channels will have priority
when manually entering a channel
number using the Channel Numbers (0-
9) on the remote control, analog
channels can still be tuned by
<
/
,
if
available
Digital
Only digital channels can be tuned
OK
EX T
OK
OK
