12
Remote Control
Installing Batteries in the Remote Control
Press the release button on the back of the remote control to remove the
battery compartment cover.
1. Slide the back cover to open the battery compartment of the remote
control.
2. Insert two AAA size batteries. Make sure to match the ( + ) and ( - )
ends of the batteries with the ( + ) and ( - ) ends indicated in the
battery compartment
.
3. Close the battery compartment cover.
NOTES
•
Product image is only for reference, actual product may vary in
appearance.
Handling the Batteries
•
Incorrect use of batteries may cause corrosion or battery leakage,
which could cause fire, personal injury or damage to property.
•
Only use the battery type indicated in this manual.
•
Do not mix old and new batteries or different types of batteries.
•
Do not dispose of used batteries as domestic waste. Dispose of them
in accordance with local regulations.
•
Battery chemicals can cause a rash. If the batteries leak, clean the
battery compartment with a cloth. If chemicals touch your skin, wash
immediately.
•
If you do not intend to use the remote control for a long time, remove
the batteries.
•
Remove depleted batteries immediately to prevent battery acid from
leaking into the battery compartment.
Pairing the Remote Control
1. Pair the remote to the TV after you power it on. Make sure your remote
is close to this TV around 3 meters. Press and hold the
[
]
button at
least 3 seconds to start pairing.
2. If the remote pairs successfully, a confirmation will display on the
screen. If it does not pair successfully, an unsuccessful message will
display. Repeat step 1.
NOTES
•
This function is only available on certain models and bluetooth
remote control in some countries/regions.
•
If an unknown error occurred with the remote then it could have been
caused by interference. Try to remove what’s causing the interference
1
Gently push and slide
2
Insert the batteries
3
Gently push and slide
and pair it again.
•
If an unknown error occurred in the remote control while the battery
power is normal, you can take out the batteries and press any key for
1~2 seconds, then the remote control can work normally.
•
The remote cannot be paired to the TV while the TV is in standby
mode.
Remote Control Operation Range
