background image

44 

27” TFT TV Service Manual 

 

05/09/2005

 

13.4. 

TSH22 

13.4.1. General 

Description 

The TSH22 is a dual bipolar operational amplifier offering a single supply operation from 3V to 30V with 
very good performances: medium speed (25MHz), unity gain stability and low noise. 
The TSH 22 is therefore an enhanced replacement of standard dual operational amplifiers. 

13.4.2. Pin 

Connections 

 

 

 

13.5. 

CS4334 

13.5.1. General 

Description 

The CS4334 family members are complete, stereo digital-to-analogue output systems including 
interpolation, 1-bit D/A conversion and output analogue filtering in an 8-pin package. The 
CS4334/5/6/7/8/9 support all major audio data interface formats and the individual devices differ only in 
the supported interface format. 
The CS4334 family is based on delta-sigma modulation, where the modulator output controls the 
reference voltage input to an ultra-linear analogue low-pass filter. This architecture allows for infinite 
adjustment of sample rate between 2 kHz and 100 kHz simply by changing the master clock frequency. 
The CS4334 family contains on-chip digital de-emphasis, operates from a 5V power supply, 
and requires minimal support circuitry. These features are ideal for portable CD players and other 
portable playback systems. 

13.5.2. Features 

 

Complete Stereo DAC System: Interpolation, D/A, Output Analogue Filtering 

 24-Bit 

Conversion 

 

96 dB Dynamic Range 

 Low 

Distortion 

 

Low Clock Jitter Sensitivity 

 

Single 5 V Power Supply 

 

Filtered Line Level Outputs 

 On-Chip 

Digital 

De-emphasis 

 

Soft Ramp to Quiescent Output Voltage 

 

Functionally Compatible with CS4330/31/33 

 
 
 
 
 
 
 
 
 
 
 

Содержание 27WLT56B





















































































Отзывы: