Toshiba 27WLT56B Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 84

background image

2

27” TFT TV Service Manual

05/09/2005

VIF amplifier, Tuner and VIF-AGC, VIF-AGC detector, Frequency Phase-Locked Loop (FPLL) detector, VCO
and divider, Digital acquisition help and AFC, Video demodulator and amplifier, Sound carrier trap, SIF
amplifier, SIF-AGC detector, Single reference QSS mixer, AM demodulator, FM demodulator and acquisition
help, Audio amplifier and mute time constant,

I²C

-bus transceivers and MAD (module address), Internal

voltage stabilizer.

4. MULTI STANDARD SOUND PROCESSOR

The MSP34x1G family of single-chip Multistandard Sound Processors covers the sound processing of
all analog TV-Standards worldwide, as well as the NICAM digital sound standards. The full TV sound
processing, starting with analog sound IF signal-in, down to processed analog AF-out, is performed on
a single chip.
These TV sound processing ICs include versions for processing the multichannel television sound
(MTS) signal conforming to the standard recommended by the Broadcast Television Systems
Committee (BTSC). The DBX noise reduction, or alternatively, Micronas Noise Reduction (MNR) is
performed alignment free. Other processed standards are the Japanese FM-FM multiplex standard
(EIA-J) and the FM Stereo Radio standard.
Current ICs have to perform adjustment procedures in order to achieve good stereo separation for
BTSC and EIA-J. The MSP34x1G has optimum stereo performance without any adjustments.

5. VIDEO SWITCH TEA6415

In case of three or more external sources are used, the video switch IC TEA6415 is used. The main
function of this device is to switch 8 video-input sources on the 6 outputs.
Each output can be switched on only one of each input. On each input an alignment of the lowest level
of the signal is made (bottom of sync. top for CVBS or black level for RGB signals).
Each nominal gain between any input and output is 6.5dB.For D2MAC or Chroma signal the alignment
is switched off by forcing, with an external resistor bridge, 5VDC on the input. Each input can be used
as a normal input or as a MAC or Chroma input (with external Resistor Bridge). All the switching
possibilities are changed through the BUS. Driving 75ohm load needs an external resistor. It is possible
to have the same input connected to several outputs.

6. AUDIO AMPLIFIER STAGE WITH TPA3002D2

The TPA3002D2 is a 9-W (per channel) efficient, Class-D audio amplifier for driving bridged-tied stereo
speakers. The TPA3002D2 can drive stereo speakers as low as 8

Ω

. The high efficiency of the

TPA3002D2 eliminates the need for external heatsinks when playing music.

«
...
3
4
5
6
7
...
»

Содержание 27WLT56B





















































































Отзывы:

Нет отзывов

Похожие инструкции для 27WLT56B

32MF339B - 32" LCD TV

Бренд: Magnavox Страницы: 3

Бренд: Magnavox Страницы: 33

42MD459B - 42" LCD TV

Бренд: Magnavox Страницы: 2

37MF337B - Hook Up Guide

Бренд: Magnavox Страницы: 3

Бренд: Magnavox Страницы: 8

Бренд: Magnavox Страницы: 2

42MF437B - 42" Digital Lcd Hdtv

Бренд: Magnavox Страницы: 2

19MF338B - 19" LCD TV

Бренд: Magnavox Страницы: 2

19MF338B - 19" LCD TV

Бренд: Magnavox Страницы: 2

Бренд: Magnavox Страницы: 25

13MT143S, 20MT133S, 20MS233S

Бренд: Magnavox Страницы: 37

Бренд: Magnavox Страницы: 38

32MF339B - 32" LCD TV

Бренд: Magnavox Страницы: 2

Бренд: TCL Страницы: 16

Бренд: Seiki Страницы: 28

Бренд: Denver Страницы: 29

Бренд: Samsung Страницы: 25

Бренд: NABO Страницы: 110

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды