Chapter 8: Advanced features
56
Setting up the Network
You can select the Network Type.
1無
>
Settings
>
PREFERENCES
>
Network
Setup
>
.
(
Another:
>
Network
>
Network Setup
>
.)
2無
Press
p
or
q
to highlight
Network Type
.
3無
Press
t
or
u
to select
Wired
or
Wireless
.
4無
If you select
Wired
, see “Advanced Network
Setup” (
page 58).
If you select
Wireless
, see the next section.
Wireless Setup
Note:
•
Continued AP (Access Point) connection is
not guaranteed. Connection may be lost while
watching TV.
There are 3 methods for wireless setup:
•
Easy Setup (WPS)
If the AP supports WPS, this can be used.
−WPS is a standard designed to simplify the
connection of wireless LAN equipment and
the setup of network security features.
•
Assisted Setup
(setup using the AP’s notification
information)
Network Name, Authentication, and Encryption are
decided based on information from the AP. You need
to manually set the Security Key.
•
Manual Setup
(to input all settings)
Easy Setup using PBC (Push Button Configuration)
1無
>
Settings
>
PREFERENCES
>
Network Setup
> .
2無
Press
p
or
q
to select
Wireless Setup
. Press .
3無
Press
p
or
q
to select
Easy Setup
. Press .
4無
Press
t
or
u
to select
PBC
.
5無
Press
q
to select
Start Scan
. Press .
6無
Following the onscreen instructions, push the
appropriate button on your AP.
7無
When a screen reporting that the setup has
succeeded appears, press .
To cancel searching for the AP:
Press
while searching for the AP. A message
will appear. Press
t
or
u
to select
Yes
. Press .
Easy Setup using a PIN (Personal Identification
Number)
1無
>
Settings
>
PREFERENCES
>
Network Setup
> .
2無
Press
p
or
q
to select
Wireless Setup
. Press .
3無
Press
p
or
q
to select
Easy Setup
. Press .
4無
Press
t
or
u
to select
PIN
.
5無
Press
q
to select
Start Scan
. Press .
6無
Scan screen appears. Enter the PIN displayed on
this screen into your PC or AP.
7無
Press
p
or
q
to select the desired AP. Press .
Note:
Check the MAC address on the label
or in the manual of the AP and select an AP.
8無
When a screen reporting that the setup has
succeeded appears, press .
To cancel searching for the AP:
Press
while searching for the AP. A message
will appear. Press
t
or
u
to select
Yes
. Press .
Assisted Setup
1無
>
Settings
>
PREFERENCES
>
Network Setup
> .
2無
Press
p
or
q
to select
Wireless Setup
. Press .
3無
Press
p
or
q
to select
Assisted Setup
. Press .
4無
Press
p
or
q
to select the desired AP. Press .
Note:
Check the MAC address on the label
or in the manual of the AP and select an AP.
5無
Select
Security Key
. Press . The Software
Keyboard appears.
6無
Input the Security Key using the Software
Keyboard (
page 59). To save your settings,
press the
BLUE
button.
Note:
The Security Key must adhere to these
conditions:
− TKIP/AES: 8-63 ASCII or 64 Hex characters
− WEP: 5 or 13 ASCII or 10 or 26 Hex characters
7無
Select
Done
. Press .
Note:
Settings are not saved if
is pressed
before
Done
is selected.
