24
Display Setup/Time Setup
Display Setup
1
Press
ϳ
or
ϴ
to select ‘Display Setup’, then press
ENTER
.
P
Subtitle
assword Setup
Display Setup
Time Setup
Main menu
System Configuration
ABC
CH
1
CH
2
CH
3
Texd
CI
i
ABC
i
2
Display Setup menu will appear.
Press
ϳ
or
ϴ
to select the item you want to change.
Then you can change each setting by pressing
ϵ
or
϶
.
Banner
timeout
1 Sec, 2 Sec.….
7 Sec.
Select how long the service
banner information appears on
screen.
Banner
position
Top
Select whether the service
banner information appears on
top or bottom of the screen.
Bottom
3
After all the changes are made, press
EXIT
to return to the
normal screen.
Time Setup
If the time displayed on the Channel banner differs from the
actual time, it can be corrected.
1
Press
ϳ
or
ϴ
to select ‘Time Setup’, then press
ENTER
.
P
Subtitle
assword Setup
Display Setup
Time Setup
Main menu
System Configuration
ABC
CH
1
CH
2
CH
3
Texd
CI
i
ABC
i
2
Time Setup menu will appear.
If the time displayed on the Channel banner differs from the
actual time, adjust the time offset with the
ϵ
or
϶
button
until the correct time is shown.
Note:
Normally, this would be done by selecting “Auto”.
•
3
After all the changes are made, press
EXIT
to return to the
normal screen.
51Z0231A_ENG.indd 24
9/26/08 12:10:29 PM
25
Note:
There are 15 age-based ratings,
ranging from ‘4’ (years old) to ‘18’
(years old) and ‘None’. Eg. If the
Parental Lock is set to ‘8’ (years
old), only the services which have
the parental rating of ‘8’ (years old)
or under will be viewable without
entering the Password.
You will be prompted to enter the
password, when you set new
parental rating.
You can set the new parental rating
only when you enter the password
correctly, otherwise the old parental
code will be retained.
•
•
Password Setup (Parental lock)
This feature allows you to have a parental control of the service
viewing as per your preference.
Once a service is protected with a password, it cannot be
viewed unless the correct password is provided.
1
Press
ϳ
or
ϴ
to select ‘Password Setup’, then press
ENTER
.
P
Subtitle
assword Setup
Display Setup
Time Setup
Main menu
System Configuration
ABC
CH
1
CH
2
CH
3
Texd
CI
i
ABC
i
2
‘Enter Password’ will appear. Press ‘
0 0 0 0
’ using the
Number Buttons
. (This is the default password.)
3
Press
ϳ
or
ϴ
to select ‘Parental Lock’, then press
ϵ
or
϶
to
select desired parental rating (see note). Then press
EXIT
to return to the normal screen.
4
You can also change the password using the next option.
Press
ϳ
or
ϴ
to select ‘Change password’.
Then enter your chosen new password (0 to 9), be sure to
remember this password. After you have entered the new
password for the first time, you need to enter the same
password again for confirmation. The Information banner
will then appear.
Press
EXIT
to return to the normal screen.
While toggling between channels, if a service which has a
parental rating is selected then you will be asked to enter the
correct password to view that channel. If the channel you are
currently watching supports a parental rating then the rating will
also be displayed in the Channel banner menu (see page 27).
Password Setup (Parental lock)
If you forget your password, follow steps below to
reset the password.
1. Press
ATV/DTV
to select the digital TV mode.
2. Press
MENU
to display the analogue menu, then
press
ϵ
or
϶
to select
(SETUP).
3. Press 4 times within 5 seconds.
The password is reset to ‘0000’.
IMPORTANT NOTE ON RESETTING THE PASSWORD
We suggest that you remove the following instruction from
the operating instructions to prevent children from reading it.
51Z0231A_ENG.indd 25
9/26/08 12:10:30 PM
26
Version/Software Upgrade/Common Interface
Version
You can check the software and hardware versions.
1
Press
ϳ
or
ϴ
to select ‘Version’, then press
ENTER
.
The hardware and software versions are displayed.
Software upgrade
Version
Main menu
Technical Information
ABC
CH
1
CH
2
CH
3
Texd
CI
i
ABC
i
2
Press
EXIT
to return to the normal screen.
Software Upgrade
Software Upgrade allows you to download the latest software
available on the Engineering channel.
1
Press
ϳ
or
ϴ
to select ‘Software upgrade’, then press
ENTER
.
Software upgrade
Version
Main menu
Technical Information
ABC
CH
1
CH
2
CH
3
Texd
CI
i
ABC
i
2
If a software upgrade is available from an Over- Air-
Download (OAD) then the message ‘S/W available, do you
want to download?’ will be displayed - you can then select
‘Yes’ or ‘No’ by pressing
ϵ
or
϶
, then press
ENTER
.
3
If you select the option ‘Yes’ then the Software Upgrade
process will be initiated. It will take about 20 minutes and
after this process is complete, the TV will be rebooted
automatically.
If you select the option ‘No’ you can continue to watch TV
programmes as before.
Note:
During the Software Updating
process, do not turn off the unit. At
this time you cannot use any of the
buttons, apart from
(Power).
After the Software Updating process,
the Digital Menu memory settings
will be lost, so it is necessary to go
through the setting up procedures
again.
•
•
Common Interface
You can access the Common Interface module information from
this menu option.
Preparations
Insert CAM into the DVB Common Interface slot on the backside
of the TV (see page 9).
1
Press
ϵ
or
϶
to select ‘Common Interface’, then press
ENTER
.
e
c
a
f
r
e
t
n
I
n
o
m
m
o
C
u
n
e
m
n
i
a
M
Common Interface
ABC
CH
1
CH
2
CH
3
Texd
CI
i
ABC
i
2
The CAM module name will be displayed. You have to press
ENTER
to view further information.
3
In the CI Menu, CAM specific information such as Module
information, Smart card information, Language and
Software Download are shown.
Press
ϳ
or
ϴ
to select information, then press
ENTER
to see detail.
4
Press
EXIT
to return to the normal screen.
51Z0231A_ENG.indd 26
9/26/08 12:10:31 PM
27
Channel list/Channel banner
Channel list
1
Press
CH LIST
to display the Channel list menu.
V
T
t
s
i
l
l
e
n
n
a
h
C
Navigate
Enter
TV/Radio
Exit
S.No Services
671 MNO
672 PQR
673 STU
674 TCM
679 VWXYZ
800 SAT.1
List of the
services
2
Select the Services:
List of the services present under the selected Channel
group will be displayed in the left side of the menu.
Press
ϳ
or
ϴ
to toggle within the service list, then press
ENTER
.
Toggle between the list of TV and Radio services:
The
TV/RADIO
is used to toggle between the TV and Radio
mode. If you press
CH LIST
when you are in Radio mode
then the channel list menu will display the list of Radio
services. If you wish to view the list of TV services without
exiting the current menu,
TV/RADIO
should be pressed
once.
Channel banner
When you change from one channel to another, the Channel
banner will be displayed for the selected service. In the channel
banner menu, information such as current date & time, channel
name, etc. will be displayed.
1
While watching the service, press to display the Channel
banner at any time. It will disappear after the Banner
timeout value (this can be adjusted to your preferred value,
see page 24).
o
e
r
e
t
S
E
N
O
C
B
B
1
0
0
251_ABC_Monosco_0...
17:17:37
8
0
0
2
/
8
0
/
0
2
8
3
:
7
1
8
0
:
7
1
0
1
:
e
g
A
Service No.
Service name
Lock status
DVB Teletext available
DVB Subtitle available
Pay TV
Audio mode
Time and
date
Parental rating
Programme name
Starting time/Ending time
of current programme
Duration
graph
Genre
Undefined
2
Press again to display the
Basic Service Information.
You can verify the signal
strength and quality of the
selected service here.
If necessary, adjust the
direction of the antenna
to obtain the maximum
signal strength.
When the Country setting has been set to FINLAND,
press once more to display the advanced detailed
information.
•
3
To remove the Channel banner immediately, press again.
Note:
If any Channel group doesn’t have
any service at the time, ‘No services’
and ‘No Information’ will be displayed
in the menu.
Channel / Service names can only be
displayed up to about 16 characters
- if the name is longer than this, it will
be abbreviated. The Basic Service
Information screen (Step 2) displays
the full Channel/Service names, not
the abbreviated names.
Subtitles are displayed on the
channel banner. Some broadcasts
may not provide this service.
•
•
•
Basic Service Information
DVB-T 64QAM
Service Name
Signal Quality
65%
Signal Strength
671_MNO_10Step_0820_0005_0030_Audio2_AB...
671_MNO_10Step_0820_0005_0030_Audio2_AB
CDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmn
opqrstuvwxyz
671 MNO
63%
Enter
Exit
51Z0231A_ENG.indd 27
9/26/08 12:10:32 PM
