background image

English

Safety Precautions

This equipment has been designed and manufactured to meet international safety standards but, like 

any electrical equipment, care must be taken to obtain the best results and for safety to be assured.

Please read the points below for your own safety. They are of a general nature, intended to help with all 

electronic consumer products and some points may not apply to the goods you have just purchased.
The Class I apparatus shall be connected to a mains socket outlet with a protective earthing  

connection.

Air Circulation

Leave more than 10cm clearance around the 

television to allow adequate ventilation. This 

will prevent overheating and possible damage 

to the television. Dusty places should also be 

avoided.

Heat Damage

Damage may occur if the television is left in 

direct sunlight or near a heater. Avoid places 

subject to extremely high temperatures or 

humidity. Place in a location where the tem-

perature remains between 5°C (41°F) min. and 

35°C (94°F) max.

Power Supply

The mains supply required for this equipment 

is 220-240v AC 50/60Hz. Never connect to a 

DC supply or any other power source. DO en-

sure that the television is not standing on the 

mains lead. 

Use only the supplied lead.

DO NOT cut off the mains plug from this 

equipment, this incorporates a special Radio 

Interference Filter, the removal of which will 

impair its performance. In the UK, the fuse 

fitted in this plug is approved by ASTA or BSI 

to BS1362.

It should only be replaced by a correctly rated

and approved type and the fuse cover must be

refitted.

IF IN DOUBT PLEASE CONSULT A COMPE-

TENT ELECTRICIAN.

Do

DO

 read the operating instructions before you 

attempt to use the equipment.

DO

 ensure that all electrical connections 

(including the mains plug, extension leads and 

inter-connections between pieces of equip-

ment) are properly made and in accordance 

with the manufacturers’ instructions. Switch off 

and withdraw the mains plug before making or

changing connections.

DO

 consult your dealer if you are ever in doubt 

about the installation, operation or safety of 

your equipment.

DO

 be careful with glass panels on equipment.

DO NOT REMOVE ANY FIXED COVERS 

AS THIS WILL EXPOSE DANGEROUS AND 

‘LIVE’ PARTS.

THE MAINS PLUG IS USED AS A DISCON-

NECTING DEVICE AND THEREFORE 

SHOULD BE READILY OPERABLE.

Do not

DO NOT

 obstruct the ventilation openings of 

the equipment with items such as newspapers, 

tablecloths, curtains, etc. Overheating will cause 

damage and shorten the life of the equipment.

DO NOT

 allow electrical equipment to be 

exposed to dripping or splashing or objects filled 

with liquids, such as vases, to be placed on the 

equipment.

DO NOT

 place hot objects or naked flame 

sources, such as lighted candles or nightlights 

on, or close to equipment. High temperatures 

can melt plastic and lead to fires.

DO NOT

 use makeshift stands and NEVER 

fix legs with wood screws. To ensure complete 

safety, always fit the manufacturers’ approved 

stand, bracket or legs with the fixings provided 

according to the instructions.

DO NOT

 leave equipment switched on when 

it is unattended, unless it is specifically stated 

that it is designed for unattended operation or 

has a standby mode. Switch off by withdrawing 

the plug, make sure your family know how to 

do this. Special arrangements may need to be 

made for people with disabilities.

DO NOT

 continue to operate the equipment if 

you are in any doubt about it working normally, 

or it is damaged in any way – switch off, with-

draw the mains plug and consult your dealer.
WARNING – excessive sound pressure from ear-

phones or headphones can cause hearing loss.
ABOVE ALL – NEVER let anyone, especially chil-

dren, push or hit the screen, push anything into 

holes, slots or any other openings in the case.
NEVER guess or take chances with electrical 

equipment of any kind – it is better to be safe 

than sorry.

Содержание 19AV703



































Отзывы: