Torqeedo Ultralight 402, Руководство по эксплуатации, Страница: 56 / 64

56
Operating Manual Ultralight 402
Deutsch
English
• If the motor has a defect an error code is shown on the display. After
resolving the error the motor can be moved out of the stop position
again. You will find descriptions and details in Section 9.3.
The
Fin
supports steering movements and protects the propeller from hitting obstacles
under water.
• Only run the motor when the propeller is under water. If it is run in the
air, the shaft sealant rings that seal the motor to the drive shaft may
become damaged. If the motor is run in the air for a longer period, the
motor itself can overheat.
• After use, always take the motor out of the water. The tilting mechanism
can be used for this.
9.5 Ideal depth of immersion
The depth of immersion of the propeller in the water affects the efficiency of your drive.
You can optimize the propeller’s depth of immersion with the help of the information on
speed and consumption shown on the display.
10. Disassembly
1. Move the remote throttle control into the stop position and remove the magnetic key
from the remote throttle. Then press the on/off switch to turn off the motor.
2. Remove all electrical connections between the remote throttle, battery pack, and motor.
3. Remove all lines for steering and locking.
4. Remove the four screws on the ball clamp and remove the drive.
• The pylon may be hot.
• Ensure that the motor’s individual parts are dry before stowing it in the
travel bag.
• Ensure you do not bend the cable and tackle line around sharp edges.
• Only use the travel bag for transportation not for shipping the motor.
The motor stored in the travel bag may not be affected by heavy objects.