Torqeedo Ultralight 402, Руководство по эксплуатации, Страница: 51 / 64

51
Operating Manual Ultralight 402
Deutsch
English
8. Operation
only start the motor again if you first replace the magnetic key and then move the remote
throttle to the central position (stop position).
The remote throttle is equipped with an on-board computer
with an integrated display and three buttons.
If you press the “on/off” button for 3 seconds you switch
the motor on. Pressing the button again for 3 seconds
switches the motor off again. You can switch the motor off
in any operating mode. If there is no activity for one hour
the motor switches off automatically. Press the button
again to switch it back on.
Use the “setup” button to set the units for the display. You enter the menu by pressing the
“setup” button for 3 seconds. First you can select the units in which the remaining range
is displayed. Move the throttle to select between kilometers, American miles, nautical
miles, and hours. You confirm your selection by pressing “setup” again. You then enter
the speed indicator setting. You can choose between kilometers per hour, miles per hour,
and knots. You confirm your selection and leave the “setup“ menu again by pressing the
“setup” button again.
The “cal” label on the middle button stands for “calibration”. If the display shows a relevant
error message you can recalibrate the motor with the help of this button. You will find details
on this in the „error codes” table in this Section.
Remote throttle control Magnetic key