Torqeedo Ultralight 402, Руководство по эксплуатации, Страница: 42 / 64

42
Operating Manual Ultralight 402
Deutsch
English
8. Starting up
8.1 Attaching and aligning the outboard motor to the kayak
1. Remove the parts that belong to the Ultralight supply scope from the packaging.
2. Slide the boom with the clamp into the universal joint and clamp it lightly with the
two screws.
3. Select the position where the drive is to be attached to the kayak. For this please note:
• You need a virtually flat surface on the kayak that is big enough to attach the
mounting ball.
• The motor‘s boom must be horizontal,
i.e. run parallel to the surface of the water.
This ensures that the shaft pipe is vertical
in the water when moving forward.
• To attach the motor to thin-walled touring kayaks it is necessary to use the rubber
rest so that the engine rests on two points on the kayak (mounting ball and rubber
rest). On thicker-walled angling and leisure kayaks it may be possible to fix the mo-
tor only with the aid of the mounting ball without a second resting point.
1.
2.