Start-up
Example of display during normal opera-
tion, when set-up was not carried out:
Example of display during normal opera-
tion, when set-up was carried out:
Fig. 47:
Multifunction display without set-up Fig. 48:
Multifunction display with set-up
5.6.4 Display settings
Fig. 49:
Multifunction display - Set-up menu
In the Set-up menu, you can select the units to be displayed on screen (in orange).
1. Press the Set-up button in order to access the Set-up menu.
2. Use the CAL button to set the unit in which the remaining range is to be dis-
played.
You can select between kilometres, American miles, nautical miles,
and hours.
3. Confirm your selection using the Set-up button.
The setting for the speed display is shown.
4. Use the CAL button to set the unit in which the speed is to be displayed.
page 91 / 121
