Toro Ultra Sonic Boom 130-8229, Руководство по установке

Страница: 4 / 8

2
Mounting the Electronic
Controller
Parts needed for this procedure:
1 Mounting bracket
1 Wiring harness
1
Electronic controller (ordered separately)
4 Bolt (1/4 x 1-1/8 inch) (ordered separately)
4 Locknut (1/4 inch) (ordered separately)
Procedure
Note:
You can find the electronic controller, bolts, and
locknuts in the Ultrasonic Boom Leveling Kit.
1. Behind the control console, remove the knockout plug
(
Figure 6 ).
Figure 6
1. Knockout plug 2. Control console
2. Remove the 2 bolts and install the mounting bracket to
the machine seat frame (
Figure 7 ).
Figure 7
1. Mounting bracket 2. Bolt
3. Secure the electronic controller to the mounting
bracket with 4 bolts (1/4 x 1-1/8 inch) and 4 locknuts
(1/4 inch) as shown in
Figure 8 .
Figure 8
1. Mounting bracket 3. Bolt (1/4 x 1-1/8 inch)
2. Locknut (1/4 inch) 4. Electronic controller
4. Route the electronic controller terminal of the wiring
harness through the knockout hole.
4