7.
Install the valve-mount bracket using the 2 bolts (5/16
x 1 inch) and 2 locknuts (5/16 inch) that you previously
removed (
Figure 4
1.
Bolt (5/16 x 1 inch)
3.
Valve-mount bracket.
2.
Nut (5/16 inch)
8.
Install the hydraulic fittings into ports C1 through C4
in the new hydraulic manifold block (
).
Figure 5
Front side of the hydraulic manifold block
1.
Nut (5/16 inch)
4.
Bolt (5/16 x 3 inch)
2.
Hydraulic connector
5.
Gauge port
3.
Hydraulic fitting
9.
Install the 2 hydraulic connectors and gauge port to the
new hydraulic manifold block (
).
10.
Install the new hydraulic manifold block onto the
valve-mount bracket with the 2 bolts (5/16 x 3 inch)
and 2 locknuts (5/16 inch) that you previously removed
(
11.
Tighten the 2 hydraulic connectors and gauge port.
12.
Tighten all fittings on the hydraulic manifold block and
valve-mount bracket.
13.
Install the hydraulic hoses into the fittings in the
corresponding ports on the hydraulic manifold block.
Important:
Ensure that you install the hoses
correctly. The hose (3/8 inch) from the return
filter connects to the “T” port and the other hose
(3/8 inch) connects to the “P” port. The hoses
from the base end of the cylinders connect ports
C1 and C3, and the hoses from the rod end of the
cylinders connect to ports C2 and C4.
14.
Purge the hydraulic system. Refer to the
Operator’s
Manual
for the machine.
3
