Toro Ultra Sonic Boom 130-8229, Руководство по установке

Страница: 2 / 8

1
Installing the Valve-Mount
Bracket
Parts needed for this procedure:
1 Valve-mount bracket
1 Hydraulic manifold block (ordered separately)
4 Hydraulic fitting (ordered separately)
Procedure
Note:
You can find the hydraulic manifold block and
hydraulic fittings in the Ultrasonic Boom Leveling Kit.
1. Disconnect the wiring harness from the hydraulic
manifold block (
Figure 1 ).
Figure 1
1. Hose 3. Wiring harness
2. Hydraulic manifold block
2. Label all the hoses connected to the hydraulic manifold
block and disconnect them from the block (
Figure 1 ).
3. Loosen the 2 hydraulic connectors on the right side
and the gauge port on the left side of the hydraulic
manifold block (
Figure 2 ).
Figure 2
Front side of the hydraulic manifold block
1. Mounting bracket 4. Gauge port
2. Hydraulic connector 5. Nut (5/16 inch)
3. Bolt (5/16 x 3 inch)
4. Remove the hydraulic manifold block from the
mounting bracket (
Figure 2 ).
Note:
Retain the fasteners.
5. Remove and retain the 2 hydraulic connectors and
gauge port from the hydraulic manifold (
Figure 2 ).
6. Remove the mounting bracket from the machine
(
Figure 3 ).
Note:
Retain the fasteners.
Figure 3
1. Bolt (5/16 x 1 inch) 2. Nut (5/16 inch)
2