2
Mounting the Electronic
Controller
Parts needed for this procedure:
1
Mounting bracket
1
Wiring harness
1
Electronic controller (ordered separately)
4
Bolt (1/4 x 1-1/8 inch) (ordered separately)
4
Locknut (1/4 inch) (ordered separately)
Procedure
Note:
You can find the electronic controller, bolts, and
locknuts in the Ultrasonic Boom Leveling Kit.
1.
Behind the control console, remove the knockout plug
(
Figure 6
1.
Knockout plug
2.
Control console
2.
Remove the 2 bolts and install the mounting bracket to
the machine seat frame (
Figure 7
1.
Mounting bracket
2.
Bolt
3.
Secure the electronic controller to the mounting
bracket with 4 bolts (1/4 x 1-1/8 inch) and 4 locknuts
(1/4 inch) as shown in
.
Figure 8
1.
Mounting bracket
3.
Bolt (1/4 x 1-1/8 inch)
2.
Locknut (1/4 inch)
4.
Electronic controller
4.
Route the electronic controller terminal of the wiring
harness through the knockout hole.
4