8
The
Delete
key is used to remove information being
selected on the keypad. For example, if you touched
key 4 but meant to touch the 7 key, touching DEL would
remove number 4 so the correct number could be selected.
Touching the
Escape
key either selects the next
keypad prompt or exits the keypad returning you to
the underlying screen. You can discontinue using the keypad
at any time by touching the ESC key.
Touching the
Enter
key places the keypad selection
into the TouchNet memory.
In the example shown above, we will adjust the current time of
1:10 PM to Daylight Savings Time. We have selected 2 from the
keypad when prompted “Hours?”. We then touch the Enter
key.
If you attempt to enter information into the TouchNet which
cannot be accepted, you will be prompted by the message
“Bad Input”. For example, if “0” was entered in the above
example, the prompt “Bad Input” would appear. A valid
number could then be selected.
Configuring The Controller – 3
1
2
Figure 6 - Entering the current hour.
RELEASED Version ©Toro 2006-2006
Содержание TouchNet NO-90-06
