16
System Hydraulics Setup
To begin, you will need to define your irrigation system
hydraulic capacities (limits). Entering accurate information on
the Hydraulics screen is essential for proper operation of the
HydroGuard flow management system.
The HydroGuard flow manager ensures that system and zone
flow capacity is utilized at peak efficiency throughout the
watering cycle. This results in the maximum amount of water
being supplied in the minimum amount of time, while
protecting the system and defined Flow Zones from excessive
flow conditions.
Select the HYDRAULICS box from the system Menu screen.
The Hydraulics screen will appear as shown in Figure 10.
Enter the flow capacity of your irrigation system by touching
the box adjacent to SYSTEM FLOW. Use the pop-up keypad to
enter a maximum of 3,000 GPM or 12 000 LPM.
Next, enter the flow limit for each Zone (1–20) in the same
manner.
Only 4 zones can be displayed at one time on the Hydraulics
screen. To scroll forward through the zone list, touch the
ZONE
>>
key. To scroll backward, touch the
<<
ZONE
key.
Return to the Menu screen by touching the
MENU
function
key.
Programming The Controller – 4
Figure 10 - System and Zone flow values.
RELEASED Version ©Toro 2006-2006
Содержание TouchNet NO-90-06
