Loading the Machine
Use extreme caution when loading or unloading machines
onto a trailer or a truck. Use a full-width ramp that is wider
than the machine for this procedure. Back the machine up the
ramp and drive it forward down the ramp (
).
g027995
Figure 40
1.
Back the machine up the
ramp.
2.
Drive the machine forward
down the ramp.
Important:
Do not use narrow individual ramps for
each side of the machine.
WARNING
Loading a machine onto a trailer or truck increases
the possibility of tip-over and could cause serious
injury or death (
).
•
Use extreme caution when operating a machine
on a ramp.
•
Use only a full-width ramp; do not use individual
ramps for each side of the machine.
•
Do not exceed a 15-degree angle between the
ramp and the ground or between the ramp and
the trailer or truck.
•
Ensure that the length of ramp is at least 4 times
as long as the height of the trailer or truck bed
to the ground. This ensures that the ramp angle
does not exceed 15 degrees on flat ground.
•
Back up ramps and drive forward down ramps.
•
Avoid sudden acceleration or deceleration while
driving the machine on a ramp as this could
cause a loss of control or a tip-over situation.
g027996
5
1
2
6
g027996
Figure 41
1.
Full-width ramp in stowed
position
4.
Ramp is at least 4 times
as long as the height of
the trailer or truck bed to
the ground
2.
Side view of full-width
ramp in loading position
5.
H=height of the trailer or
truck bed to the ground
3.
Not greater than
15 degrees
6.
Trailer
31
Содержание TimeCutter HD X5450
Страница 55: ...Schematics g203461 Electrical Diagram Rev A 55 ...
Страница 56: ...Notes ...
Страница 57: ...Notes ...
Страница 58: ...Notes ...
