Toro Reelmaster 33455, Руководство оператора

Страница: 19 / 28

g012766
Figure 22
1. Mounting hole 3. Lockup pin
2. Lockup bracket 4. Hairpin
Note:
In some areas there are regulations
requiring a slow moving vehicle sign be attached
to vehicle during transport. A mounting bracket
(
Figure 23 ) is attached to the rear cross channel
of the transport frame. A standard slow moving
vehicle sign will fit on the bracket.
CAUTION
Never exceed 32 km/h (20 mph) while
transporting.
Reduce speed and shift into a lower gear
before descending a steep or long grade.
g012767
Figure 23
1. Slow moving vehicle mounting bracket
5. When mowing is to be resumed, remove
transport strap from lift arms. Store on center
frame channel and secure with hairpin cotters
(
Figure 19 ). Remove lockup pin secured to
lockup bracket and secure to cylinder rest with
hairpin cotter (
Figure 21 ).
Inspection And Clean-up
After Mowing
At the completion of mowing operation, thoroughly
wash the machine with a garden hose without a
nozzle so excessive water pressure will not cause
contamination and damage to seals and bearings.
After cleaning, it is recommended the machine be
inspected for possible hydraulic fluid leaks, damage
or wear to hydraulic and mechanical components and
the cutting units checked for sharpness.
19