Toro Reelmaster 33455, Руководство оператора

Страница: 15 / 28

Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Before Operation
Before Operation Safety
General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Always shut off the tow vehicle engine, remove
the key, and wait for all moving parts to stop
before adjusting, repairing, cleaning, or storing the
machine. Know how to stop the tow vehicle and
shut off the engine quickly.
•
Keep all guards, safety devices, and decals in
place. Repair or replace all safety devices. Do not
operate the machine unless they are present and
functioning properly.
•
Ensure that the tow vehicle is suitable for use with
an implement of this weight by checking with the
tow vehicle supplier or manufacturer.
•
Do not modify this equipment in any manner.
Training Period
Before mowing for the first time, practice operating
your tow vehicle and transport frame in a large, clear,
level area. Start, stop, raise and lower mowers
and maneuver the machine with all mowers down
to develop skills necessary to keep control of the
extreme outboard mowers to prevent hitting obstacles.
Also, practice operating at transport speeds with
mowers in transport position to achieve familiarity with
all types of operating conditions.
Using the Tow Bar Jack
Supporting the Transport Frame
with the Jack
Note:
Before performing this procedure, connect the
transport frame to a tow vehicle or use jack stands to
support the transport frame.
1. Remove the pin from the jack and storage tube
(
Figure 16 ).
g316578
Figure 16
1. Storage tube 3. Jack in the horizontal
position
2. Ball pin
2. Rotate the jack vertical ( Figure 17 ).
3. Align the hole in the storage tube with the hole
in the jack (
Figure 17 ).
4. Insert the pin through the holes in the storage
tube and jack (
Figure 17 ).
g316579
Figure 17
1. Ball pin 3. Jack pad
2. Jack in the vertical position
5. Rotate the jack handle until the transport
frame is at the desired height. Rotate the
jack handle clockwise to raise the frame and
counterclockwise to lower the frame.
15