Grinding the Cutting Units
•
Grind reel blades or bedknives to correct
excessively rounded or distorted reel edges or
bedknife edges.
Important:
Replace the bedknives at the end
of their wear life.
•
Grind new blades on their holders prior to fitting.
•
When grinding reel blades or the bedknives are
needed, it is essential that they are ground at the
same time.
Note:
The only exception to this rule is when a
new reel is installed, in which case only grind the
bedknife.
•
Have your authorized Toro dealer grind your reel
blades and bedknives on a quality, well-maintained
reel / bedknife grinding machine.
Chassis Maintenance
Inspecting the Seat Belt
Service Interval:
Before each use or daily
1.
Inspect the seat belt for wear, cuts, and other
damage. Replace the seat belt(s) if any
component does not operate properly.
2.
Clean the seat belt as necessary.
Checking the Fasteners
Service Interval:
Before each use or daily
Check the machine for loose and missing fasteners.
Note:
Tighten any loose fasteners; replace any
missing fasteners.
Extended Maintenance
Service Interval:
Every 250 hours—Inspect the
cooling-system hoses.
Every 2 years—Flush and replace the coolant.
Every 2 years—Replace all moving hoses.
Every 2 years—Replace the transmission cable.
56
