Lubrication
Greasing the Bearings, Bushings, and Pivots
Service Interval:
Before each use or daily—Lubricate the grease-daily fittings.
Every 50 hours—Lubricate the grease every 50-hour fittings.
Important:
Lubricate the bearings, bushings, and pivot points immediately after every washing,
regardless of the service interval listed.
Grease specification:
No. 2 lithium grease.
•
Use 1 pump of grease on the height-of-cut adjusters and 3 pumps of grease on all other grease fittings
•
Refer to
for the grease fitting locations.
•
Replace any damaged grease fittings.
g034909
Figure 48
1.
– Grease every 50 hours
2.
– Grease daily
40
