Toro LT3340, Руководство оператора

Страница: 50 / 64

g292487
Figure 63
4. Clean the screens.
5. Unlatch and open the hood ( Figure 64 ).
g292486
Figure 64
6. Thoroughly clean all debris out of the engine
area.
7. Thoroughly clean both sides of the radiator and
oil cooler with compressed air (
Figure 65 ).
g328487
Figure 65
1. Radiator
8. Close and latch the hood.
9. Assemble the screen onto the pivot pins, close
the screen and secure it with the latch and ball
pin.
Checking the Coolant Level
Service Interval: Before each use or daily
The cooling system is filled with a 50/50 solution
of water and permanent ethylene glycol antifreeze.
Check the level of coolant in the expansion tank at the
beginning of each day before starting the engine.
CAUTION
If the engine has been running, the
pressurized, hot coolant can escape and
cause burns.
• Do not open the radiator cap when the
engine is running.
• Use a rag when opening the radiator cap,
and open the cap slowly to allow steam to
escape.
1. Check the level of coolant in the expansion tank
(
Figure 66 ).
The coolant level should be between the marks
on the side of the tank.
50