Toro Infield Pro 08712, Руководство оператора

Страница: 7 / 20

g018349
Figure 9
1. Hitch frame bracket 3. Hitch frame tube
2. Hitch frame
8. Secure the frame adapter to the hitch frame with
a tube, a clevis pin, and a cotter pin (
Figure 10 ).
g018307
Figure 10
1. Frame adapter 3. Clevis pin with grease
fitting
2. Tube
g028340
Figure 11
Important:
Ensure that the existing hoses
are routed above the guide, as shown in
Figure 11 .
6
Installing the Hydraulic
Cylinder
Parts needed for this procedure:
1 45-degree hydraulic fitting with O-ring
1 Hydraulic cylinder
1 90-degree hydraulic fitting with O-ring
1 Small retaining ring
1 Pin
2 Large retaining ring
Procedure
1. Thread a 90-degree fitting into the upper port
in the hydraulic cylinder. Position the fitting as
shown in
Figure 12 .
Note:
Make sure that all O-rings are lubricated
and properly positioned on fittings before
installation.
Note:
To prevent contamination to the hydraulic
fittings or hoses, do not remove the caps from
the fittings or hoses until they are installed.
2. Thread a 45-degree fitting into the lower port
in the hydraulic cylinder. Position the fitting as
shown in
Figure 12 .
7