Toro Groundsmaster 5900 Series, Руководство по установке

Страница: 9 / 16

4. Hold the pivot bracket on the rear of the left frame
and drill 3 holes (10 mm or 0.39 inch diameter) in the
locations shown in
Figure 15 .
Note:
You will not use the lower front hole in the
pivot bracket.
g037878
Figure 15
1. Direction toward the front
of the machine 3. Drill here.
2. Pivot bracket
5. Install the left pivot bracket to the bumper bracket
using 3 bolts (3/8 x 1 inch) and 3 nuts (3/8 inch) as
shown in
Figure 16 .
g035979
Figure 16
1. Bolt (3/8 x 1 inch) 3. Pivot bracket
2. Unused hole 4. Nut (3/8 inch)
6. Insert a roll pin in the pivot arm ( Figure 17 ).
g035980
Figure 17
1. Pivot arm 4. Hex-washer bolt (1/4 x 3/4
inch)
2. Spring 5. Roll pin
3. Washer
7. Install a spring, washer, hex-washer bolt (1/4 x 3/4
inch), and pivot arm to the pivot bracket (
Figure 17 )
8. Install the left lamp shroud to the pivot arm using 4
hex-washer bolts (1/4 x 3/4 inch) and 4 nuts (1/4 inch)
as shown in
Figure 18 .
g205339
Figure 18
1. Hex-washer bolt (1/4 x 3/4
inch) 3. Nut (1/4 inch)
2. Lamp shroud
9