Toro Groundsmaster 5900 Series, Руководство по установке

Страница: 5 / 16

4
Installing the Headlights
(for Machines with ROPS
only)
Parts needed for this procedure:
1 Right headlight mount
1 Left headlight mount
2 Cover panel
8 Plug
1 Right headlight assembly
1 Left headlight assembly
Procedure
1. Unplug the wire harness from each existing headlight.
2. Remove the headlights ( Figure 6 ).
g188849
Figure 6
1. Headlight 2. Remove the hardware
here.
3. Remove and retain the hardware from the operator’s
platform (
Figure 6 ).
4. Using the fasteners that you removed, install the left
and right headlight mounts to the existing holes in the
front of the operator’s platform (
Figure 7 ).
g035974
Figure 7
1. Headlight assembly 3. Previously removed
fasteners
2. Headlight mount
5. Remove the fasteners from the headlight assembly and
use them to mount the headlights to the headlight
brackets (
Figure 7 ).
6. Connect the wire harness to the right headlight ( Figure
8 ).
g036569
Figure 8
1. Right headlight connector 4. Connect to existing left
headlight wire harness.
2. Connect to existing right
headlight wire harness. 5. Left headlight connector
3. Front turn signal connector
5