Toro Groundsmaster 5900 Series, Руководство по установке

Страница: 10 / 16

9. Install the left light to the shroud using 2 bolts (M6 x
30) and 2 nuts (M6) that you removed in
2 ( Figure 19 ).
g205340
Figure 19
1. Nut (M6) 2. Bolt (M6 x 30)
10. Install the reflector to the light.
11. Install the left direction indicator light and secure with
2 locknuts (
Figure 20 ).
g205338
Figure 20
1. Direction indicator light 2. Locknuts
12. Connect the left tail light connector of the tail-light
wire harness to the light (
Figure 21 ).
g205337
Figure 21
1. Fuses 3. left direction indicator light
connector
2. Left tail-light connector
13. Connect the left direction indicator light connector of
the direction indicator light wire harness to the light
(
Figure 21 ).
14. Route the wire harness under the frame of the machine
and connect the other end of the tail-light wire harness
to the machine wire harness.
Note:
Use the left tail-light connection that you
disconnected in step 1 .
15. Install the rear light panel using 4 hex-washer bolts
(1/4 x 3/4 inch) as shown in
Figure 22 .
g205341
Figure 22
1. Light 3. Hex-washer bolt (1/4 x 3/4
inch)
2. Rear light panel
16. Repeat steps 2 through 15 for the right tail light and
license-plate wire harness.
17. Connect the wire harness to the license-plate light.
10