Toro Groundsmaster 5900 Series, Руководство по установке

Страница: 4 / 16

3
Installing the Flasher
Module
Parts needed for this procedure:
1 Flasher module
1 Wire harness
1 Switch
1 Auxiliary-brake decal
Procedure
1. Remove the 6 bolts from the console and remove the
panel (
Figure 3 ).
g186692
Figure 3
1. Turn-signal switch 3. Panel
2. Hazard switch 4. Bolt (6)
2. Disconnect the connectors from the hazard switch and
turn-signal switch (
Figure 3 ).
3. Remove the knockout from the control panel and
install the switch (
Figure 4 ).
g186717
Figure 4
1. Switch
3. Knockout
2. Auxiliary-brake decal
4. Adhere the auxiliary-brake decal above the switch
(
Figure 4 ).
5. Connect the new wire harness to the flasher module,
hazard switch, turn-signal switch, and auxiliary-brake
switch (
Figure 5 ).
g186719
Figure 5
1. Connect to the
auxiliary-brake switch. 4. Connect to the main wire
harness.
2. Connect to the turn-signal
switch. 5. Connect to the EU Light
Power connector on the
main wire harness.
3. Connect to the hazard
switch.
6. Flasher module
6. Connect the wire harness to the machine main wire
harness inside the console (
Figure 5 ).
7. Install the panel ( Figure 3 ).
4