3
Installing the Bagger Bracket
(Z400 Mowers with 52-inch
Mower Decks)
Parts needed for this procedure:
1
Bagger bracket
8
Bolt (5/16 x 1 inch)
8
Flange nut (5/16 inch)
Procedure
Note:
Use these instructions if machine is equipped with
a rear weight.
1.
Remove the rear weight from the back of the machine
(
).
Note:
Save the bolts and flange nuts.
Figure 10
1.
Bolt
4.
Engine-guard strap
2.
Flange nut
5.
Rear weight
3.
Rear bumper
Note:
Make sure to install the bagger bracket correctly,
as shown in
Figure 11
1.
Correct position
2.
Incorrect position
2.
Install the bagger bracket and weight to the engine
straps, tailpipe guard, and rear bumper with the 8
existing bolts and nuts previously removed (
).
Figure 12
1.
Bagger bracket
4.
Rear bumper
2.
Bolt
5.
Engine-guard strap
3.
Flange nut
6.
Rear weight
8
