Toro 78531, Руководство оператора

Страница: 15 / 32

Figure 30
1. Bagger hood 4. Upper tube
2. Mark at rubber seal 5. Lower tube
3. Drill 7/32 inch diameter
holes here (use upper tube
as a template) 6. Blower assembly
12. Remove the lower tube from the blower.
13. Join the upper and lower tubes with 3 bolts (#10 x
3/4 inches), 3 flat washers (7/32 inch), and 3 locknuts
(#10) as shown in
Figure 31 .
Figure 31
1. Lower tube 4. Locknut, (#10)
2. Upper tube
5. Bolt, (#10 x 3/4 inches)
3. Flat washer, (7/32 inch)
14. Install the lower tube onto the blower housing and
secure it with the latches (
Figure 29 ).
15. Install the bags onto the bagger.
15